Replacing Battery In Chevy Key Fob
Replacing Battery In Chevy Key Fob. Make sure to align the new battery in the. This will pop the key fob open.
Disconnect the circuit board and buttons from the key fob. For instructions on how to replace the battery in the key fob, refer to your owner's manual under keys and remote control. You will hear a cracking sound when the key fob locks.
Locate The Small Silver Button On The Side Of Your Key Fob.
That may have been true but the service rep had never been faced with the problem. Insert the metallic key and turn it on the side. If you are not mechanically inclined you can always call keyway locksmith.
Do Not Wipe Off Any Grease On The Battery Terminals Or On The Back Surface Of The Circuit Board.
When you hear the door locks engage and. Use your hands to separate the two halves. Pry it up to open the key fob.
Be Careful Not To Break Them In The Process.
Turn the key to the “off” position. If you hear the door locks engage and disengage, that’s a sign that your chevy key fob programming can start. Repeat with more key fobs.
On The One Cover There Is The Battery While On The Other Side Is.
The interior lights and radio will come on, but the engine should not be ignited. Insert back the key into the hole you tick it from and twist it. This battery is very common and you can find it in most hardware stores, autozone, locksmith shop, and online.
We Also Recommend Getting A Cover For The Key Fob To Keep It In Better Condition.
Line up the two halves of the fob together. One of the most popular chevrolet key fobs to date, this was used on models. To do this, pry apart the key fob and replace the coin battery inside with a new one.
Comments
Post a Comment