How To Use A Battery Tester
How To Use A Battery Tester. Ok before you start your load test you will need to locate the cold cranking amp rating on your battery. How to check your car battery with a multimeter.
Before taking the reading, make sure the battery is. Connect the negative and positive leads to. Turn on the tester and press the test button.
How To Check Your Car Battery With A Multimeter.
Connect the red probe of the multimeter to the positive terminal of the battery, which is denoted by a plus sign. In this video, our diy expert will showcase our battery & alternator tester. To put an electrical load.
Testing Under Load Using The Setting Knob On The Multimeter’s Face, Change The Scale To Dc.
Connect the negative and positive leads to. Using your multimeter, you want to measure dc voltage (this is indicated with a solid line and a dashed line above a letter v). This tester will allow you to properly test batteries up to 1000 cold cranking amps.
Open The Hood And Use The Support To Prop The Hood Open.
Insert the battery into the tester, making sure the positive and negative contacts on both the battery and the tester are properly aligned. Turn on the tester and press the test button. If it stays above 9.6 volts for 15 seconds, the battery passes the test.
Connect The Load Tester To The Battery As Before But Do Not Depress The Load Test Switch.
Take a look at the meter’s reading. Use the carbon pile load tester to test the battery. Hold the red probe to the positive terminal and the black probe to the negative terminal.
Make Sure That All Of This Is Secure Before Beginning The Following Steps.
Set the dial to 20. Connect the positive (red) lead to the positive battery terminal. Then you turn on the load and watch the voltage.
Comments
Post a Comment